"Hey Van,
That would be fine. I will be back in town after Memorial Day. If you want to drive up after that, I live in Rogersville AL. Maybe 8 - 10 hours drive from Tallahassee. Also, if you want to talk, my number is 256-247-7488. "
Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
-
Van Lovett
- Tallahassee, FL
- United States
- Blog Posts
- Discussions (15)
- Events
- Groups
- Photos
- Photo Albums
- Videos
Van Lovett's Discussions
Mounted an engine
Started this discussion. Last reply by Gino Shtirlits Jul 20, 2019. 3 Replies 6 Likes
Van Lovett's Page
Latest Activity
"I posted some pictures, I think at least one of them had the sharpie marks I used as a reference to drill the holes. In my ffw kit, there was a piece of angle aluminum pre-drilled for the radiator bungs, but not drilled to mount the radiator to the…"
"Thanks for the quick reply :)
I'm just starting my Cruzer (at the elevator now) and slowly but surely thinking about the engine. Lots of people appears to go with the UL Power but here in Canada with the exchange rate it gets crazy…"
Profile Information
- Aircraft Model
- STOL CH 750
- Project Status
- Less than half
- Building From
- Kit
- Engine installed (or plan to install)
- other auto conversion
- Building Experience
- No Experience
- Flying Experience
- Commercial / CFI
- Building and Flying Info / Your Profession / Other Background Info
- Airline pilot/former military
- Home Airport (ie. KMYJ)
- KTLH
Comment Wall (3 comments)
- At 7:12am on May 16, 2020,
Tim Hine said…
Hey Van,
That would be fine. I will be back in town after Memorial Day. If you want to drive up after that, I live in Rogersville AL. Maybe 8 - 10 hours drive from Tallahassee. Also, if you want to talk, my number is 256-247-7488.
- At 7:21pm on May 2, 2020,
I posted some pictures, I think at least one of them had the sharpie marks I used as a reference to drill the holes. In my ffw kit, there was a piece of angle aluminum pre-drilled for the radiator bungs, but not drilled to mount the radiator to the gear case supports. I took pics and got mark’s approval before I drilled. I first drilled very small pilot holes to make sure I heat the meat of the gear case support, then drill carefully, making sure drill was level and straight.
let me know if you need additional pics.
- At 3:27pm on August 12, 2019,
Luc Noel said…
Thanks for the quick reply :)
I'm just starting my Cruzer (at the elevator now) and slowly but surely thinking about the engine. Lots of people appears to go with the UL Power but here in Canada with the exchange rate it gets crazy expensive. I checked several videos about AeroMomentum and did reading that can be done. They look really good for power/pricing/support and overall value... also look like honest folks. I'm still probably 2 years away but any info from current owners is a plus for my decision. I'm just not sure why not more people are not going that route if it seems so perfect.
Keep me posted how it goes!
Cheers!
Luc.
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
Switch to the Mobile Optimized View
© 2024 Created by Zenith.Aero.
Powered by
