Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
2011-8-26
Nose Skin redrilled to size and clecoed. Nose Ribs added around 6.5 gal fuel tank
Albums: My 601HD project
Comment
-
Comment by Elmer Wayne Hite III on August 28, 2011 at 11:43am
-
Oops! I drew a overlap line on the bottom rear wing skin so I could determine from the edge of nose skin to draw the rivet line. One side 25 mm and oops 35 mm on the other side. On the 35 mm side the rivet holes was half on and half off the main spar. So I ended up realigning the skin and re-drilling between the pitch 40 rivet holes, 20 mm from each rivet hole new rivet holes and now centered on main wing spar. Mine is truly is an amateur built aircraft.
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2024 Created by Zenith.Aero.
Powered by
You need to be a member of Zenith Aircraft Builders and Flyers to add comments!
Join Zenith Aircraft Builders and Flyers