Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
Instrument Panel complete
Comment
-
Comment by Dr. Edward L. Olds III on September 23, 2011 at 12:10am
-
Jimmy,
Looking good! Are you going with the rubber fuel lines or aluminum?
I spent the past few days since coming back from the Open Hangar Day fixing issues that I saw down there. I had taken a picture of the l angle that stiffens the back of the Flaperon Bearing because it was different than mine. That turned out to be fine, but Roger noticed that I had the old Bearing and it was not allowing the Flaperon motor to move enough! Apparently Zenith changed the part. I did a little grinding and it is fine, but it took a while.
Well, again, congrats on the good looking panel and the progress.
Ed
-
Comment by Tim Smart on September 22, 2011 at 4:06pm
-
Nice job, plane, panel, cowl - all.
-
Comment by Paul on September 22, 2011 at 10:40am
-
Getting closer Jimmy, looking good.
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2024 Created by Zenith.Aero.
Powered by
You need to be a member of Zenith Aircraft Builders and Flyers to add comments!
Join Zenith Aircraft Builders and Flyers