Online Community of Zenith Builders and Flyers
Aileron Elevator mod 1
Cut the Elevator/aileron rod - bracket ready to reinstall in the plane. Could not take the front part out because of the seats, console and all.
Comment
-
Comment by Joseph F. Truncale on January 25, 2012 at 6:33pm
-
-
-
Hi Normand. I did a mod to the elevator control to separate it from the ailerons. I cut out the center of the torque tube as you have and ran a smaller tube thru it to transmit the torque to the aileron bellcrank. I can't quite figure out what you are going to reinstall. Are there other parts not shown?
Best,
Joe
New from Zenith:
Zenith Planes & Parts For Sale
Classified listings for buying or selling Zenith builds and parts...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2026 Created by Zenith.Aero.
Powered by
You need to be a member of Zenith Aircraft Builders and Flyers to add comments!
Join Zenith Aircraft Builders and Flyers