Online Community of Zenith Builders and Flyers
NOTE: valve is orientated incorrectly. silver fittings should be on the other side, (downstream of the valve)
Tags:
Comment
The valve is made by Matco, available directly from them I believe. I sourced through Aircraft Spruce.
http://www.aircraftspruce.com/catalog/lgpages/matcoPBVALVE.php
I came thru the middle since both lines had to go into and out of the valve. It will be a bit of a challenge securing the lines in the tunnel with Adel clamps but certainly doable best I can tell...
I plan on running a few wires thru the tunnel, or maybe the the coax for the radio and/or ELT
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2024 Created by Zenith.Aero. Powered by
Exlusive online community for active builders and pilots of Zenith Aircraft kits (Chris Heintz / Zenair light airplane designs).
You need to be a member of Zenith Aircraft Builders and Flyers to add comments!
Join Zenith Aircraft Builders and Flyers