Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
CH750 ruddder nose & tip rib
Comment
-
Comment by Ralph E. Wishart on January 8, 2012 at 1:22pm
-
The top rib won´t touch the spar so you´re good to go. Just remember that crimp when you´re drilling the rivet holes.
Good luck.
-
Comment by Greg Harris on January 8, 2012 at 8:57am
-
Well, there's enough room for the bent strip, but my crimps might run into the spar...I guess we'll find out!
-
-
I surely hope so...didn't think about it when I drilled the tooling hole. If I didn't, I guess I'll be making it again.
-
-
Do you have enough room for the bent strip holes?
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2024 Created by Zenith.Aero.
Powered by
You need to be a member of Zenith Aircraft Builders and Flyers to add comments!
Join Zenith Aircraft Builders and Flyers