Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
Forming Landing Gear Fork
Comment
-
Comment by Earnest Fontenot on January 17, 2016 at 11:42am
-
Thanks for the reply and info. I have a while before I get to this point but am starting to think about it.
-
Comment by David Farlow on January 15, 2016 at 10:19pm
-
The bolts are 3/4", and, yes, they did bend, even with the 1/4" steel plate tipping plates. I think, If I had welded 3/4" pipe to the 1/4 plates and then put the bolts through, they may not have bent.
-
Comment by Lee Engel on November 19, 2015 at 4:44pm
-
good old American ingenuity!! I love it!> Lee
-
-
What size are the bolts? Did they bend?
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2024 Created by Zenith.Aero.
Powered by
You need to be a member of Zenith Aircraft Builders and Flyers to add comments!
Join Zenith Aircraft Builders and Flyers