Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
Working on controls
Stick in place. Temporarily of course, still must do the elevator rod work.
Albums: Jimmy's Build Photos
Location: Houston, TX
Comment
-
Comment by Jim Derickson on December 15, 2010 at 9:24pm
-
Hi Jimmy, looks good, I found that a long an-3 bolt and a few washers with a casalated nut and cotter pin worked well to secure the elevator bellcrank. I don't have the plans here anymore. There was 2 places I did this on the controls. Where they tell you to drill and add a cotter key, use the bolts, ( If you want to, I thought it was better ) You will be flying in no time ! Jim
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2024 Created by Zenith.Aero.
Powered by
You need to be a member of Zenith Aircraft Builders and Flyers to add comments!
Join Zenith Aircraft Builders and Flyers