Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
Console for headset jacks
Service loop for mic and phone cables barely visible. Once jacks are soldered and prepped for install I will route them thru the pass thru underneath the jack console. The jack console is removable to allow access for install of jacks. Used 6-32 screws and nutplates. Also wanted the jack console not located on the center tunnel, so it would be one less thing to be in the way when accessing the center tunnel for any reason.
Comment
-
Comment by Greg Priest on March 31, 2019 at 4:21am
-
Hi David....where did you purchase that small console for mounting the headphone jacks within. ??
Cheers
Greg Priest
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2024 Created by Zenith.Aero.
Powered by
You need to be a member of Zenith Aircraft Builders and Flyers to add comments!
Join Zenith Aircraft Builders and Flyers