Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
BNC connectors
After a bit of practice, I made two BNC RG400 crimp connector ends. One was a straight and one was a right angle connector. For the transponder I need a male TNC right angle ($$) but will likely use an adapter to change the TNC to a BNC, then use a right angle BNC for the cable end. Mouser has everything you would ever need when you start doing this and can't find it in ACS
Comment
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2025 Created by Zenith.Aero.
Powered by
You need to be a member of Zenith Aircraft Builders and Flyers to add comments!
Join Zenith Aircraft Builders and Flyers