Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
The Finished Product
The larger molds will be used in cutting the 6061-T6 to size. The smaller ones will be used to shape the actual nose rib.
Comment
-
Comment by Henri Luyckx on November 19, 2012 at 1:34am
-
Hi David
Beware, the corners have to be rounded off to a 3mm radius for the aluminum not to break and the sides need to be 7 degrees inward to counter the spring back. The DVD "101 metalworking" from home build help is a must.
Have also a look at my pages on this site.
Henri
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2024 Created by Zenith.Aero.
Powered by
You need to be a member of Zenith Aircraft Builders and Flyers to add comments!
Join Zenith Aircraft Builders and Flyers