Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
Instrument Panel coming together
The one piece panel has been cut into three parts. The left side will include the engine/radiator controls, elevator trim and radio/intercom, the center the instrument cluster, switches/fuses/fuel gauge and the right section the fuel primer, pump, selector and xponder with mode C. The open center right is prepared for the Lowrance 1000 gps tilt mounted on the face of the panel.
Comment
-
Comment by Ari Hulkkonen on December 26, 2013 at 5:13am
-
I've got a pretty similar screw mounted three part panel construction. Works well and makes maintenance much easier as the panels can be removed. In addition, all the harnesses are connected with AMP Super seal connectors so it's only a matter of a couple of minutes to remove the entire panel with all instruments and switches for service.
So, I would recommend your panel installation!
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2024 Created by Zenith.Aero.
Powered by
You need to be a member of Zenith Aircraft Builders and Flyers to add comments!
Join Zenith Aircraft Builders and Flyers