Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
instrumentpanel2 006
Comment
-
Comment by jim on July 10, 2011 at 3:56am
-
hi jerold, i made new panel out of .025 into 3 sections that screw into old cut out,(left 20 mm of old all around)
put 2 L angles.025 vertical at joints. I can now take left, right or center without remowing the lot. regards jim
-
Comment by Jerold Ebke on July 9, 2011 at 12:44pm
-
Jim,
Did you break panel into 3 sections so you could remove individual portions for access to the back side of the panel by unscrewing or drilling out some rivets?
If so, did you use factory panel as a base to mount this second panel with cutouts on the factory panel to accomodate the instruments? Jerry Ebke
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2024 Created by Zenith.Aero.
Powered by
You need to be a member of Zenith Aircraft Builders and Flyers to add comments!
Join Zenith Aircraft Builders and Flyers