Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
Lake & Air Pump Outs Zenith 1450 Floats
Picture of pump out cup & hose clamped in place on bulkhead in front of main gear wheel well.
Comment
-
Comment by Bob McDonald on September 14, 2011 at 3:54pm
-
"YESY" its a zip tie. The sun & vibration will do its best to relocate the bilge drain hose (water is rough). Since I do not want to get back in there (Zenith made no inspection covers) soon I went the extra step in adding zip ties to keep the drain hose end located in the bottom of the bilge. Hose is 5/8" automotive heater hose....fits the nipple on the tapered cup.
-
Comment by Mike Ice on September 14, 2011 at 12:13pm
-
Bob,
Is that a zip tie and an Adel clamp I see in the picture. Good idea.
Why did you decide on the particular kind of hose that you are using?
Mike
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2024 Created by Zenith.Aero.
Powered by
You need to be a member of Zenith Aircraft Builders and Flyers to add comments!
Join Zenith Aircraft Builders and Flyers