Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
1450 Bottom Skins (Rear)
Both left & right bottom skins, keel, and step doubler clecoed in place. No you remove and apply 3M Marine sealer / adhesive along keel...same with the step doubler. You re-install and rivet the keel and step doubler being careful to avoid the "No Rivet" areas of the bulk heads. You can then remove both bottom skins as a single piece and add extra 3M Marine sealant "inside" along the keel line. Next step after that is to put 3M Marine sealant on all bulkheads,, edges and mating surfaces...both the bottom skins and bulkheads get the treatment. With the help of a friend or "wife" :>) the bottoms skins and all that sealant get clecoed together for the final riveting.
Comment
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2024 Created by Zenith.Aero.
Powered by
You need to be a member of Zenith Aircraft Builders and Flyers to add comments!
Join Zenith Aircraft Builders and Flyers