Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
Parts Right Out Of The Box !
This is the reinforced doubler that rivets to the step. I am holding the one for the other side of the float so you can get a good look at the one on this side clecoed and ready to rivet. ``YES`` the glue from hell even goes between this part and the float skin. The 3M Marine stuff cures over a couple days, but once you start to assemble the parts you must complete that section in 3 - 4 hours.
Comment
-
Comment by Bob McDonald on September 5, 2011 at 5:11pm
-
The visable rivet lines have been cleaned.. with acetone. Only way to get the 3M Marine Sealer off of anything...even your skin. Let it dry and its impossible to get off except with a chisel. 3M residue will probably buff off as I prepare the floats to paint or polish the aluminum if I don't paint them.
-
Comment by Andre Levesque on September 5, 2011 at 4:25pm
-
Bob, it looks great and solid. How will you clean that glue off the skins?
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2024 Created by Zenith.Aero.
Powered by
You need to be a member of Zenith Aircraft Builders and Flyers to add comments!
Join Zenith Aircraft Builders and Flyers