Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
LZ_tip brace
Struggled to fit the 650 fiberglass tip into the nose radius for two weeks. I just could not push the tip fully into the radius. Made a 2x4 brace clamped to the rear spar to push this into place.
Comment
-
Comment by Larry Zepp on January 31, 2013 at 5:07am
-
Hi Marty, Thanks for your comment, I thought having problems with the tip fitting was just me! I trimmed 10 mm from the nose skin at the bend, and about 4 mm at the third rivet hole to make a smooth arc. LZ
-
Comment by Marty Leglar on January 29, 2013 at 12:27am
-
Nice. I have also been struggling with those fiberglass tips. Same issue. Unable to get the nose to fit without a gap. I finally cut the fiberglass tip at the spar and was able to fit the nose in with "moderate" persuasion. Will finish the tip "XL" style with aluminum sheet.
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2024 Created by Zenith.Aero.
Powered by
You need to be a member of Zenith Aircraft Builders and Flyers to add comments!
Join Zenith Aircraft Builders and Flyers