Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
N904MS gets a new engine
JabiruUSA was having difficulty getting my engine put back together after six months of effort. We finally agreed upon a solution which consisted of exchanging my old engine for a almost new engine with only 5 hours on it. Even though it has been a very long and trying process, I'm appreciative of Jabiru's solution. I would have liked to have had the plane ready for the open hanger day, but just did not have enough time.
Comment
-
Comment by Bob McDonald on September 17, 2011 at 6:59am
-
Looking good Mike.
-
Comment by Mike Schlichtman on September 16, 2011 at 8:48pm
-
Phill, It's a long story. Most of the hold up was me wanting to get all the new SB parts on before reasembly. The timing of the situation was right in the middle of Jabiru Aus figuring our what to do. Then we had to wait for them to make the parts. We also had a problem getting the case line-bored. We ended up sending it to JabiruPacific, but we had to wait for him to get his tooling in place. This was after sending it to Tulsa, in which they sent it back saying they could not do the line-bore. Then it went to Arizona for assembly. The guy in Arizona got snowed under and the engine sat for the longest time. Finally, out of frustration from both myself and JabiruUSA, we decided on exchanging the engine. I am working on getting an A/P on my field up to speed to become a Jabiru service center. He will be flying up with me tomorrow to the open Hanger day at Mexico. Both Jabiru distributors have agreed to support a service center in the Midwest. This would give the Jabiru guys three (east, central and west coast) locations to send their engines for work.
-
Comment by Phill Barnes on September 16, 2011 at 8:34pm
-
Wow Mike, 6 months to reassemble an engine? What were they doing or saying that could justify that?
Phill
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2024 Created by Zenith.Aero.
Powered by
You need to be a member of Zenith Aircraft Builders and Flyers to add comments!
Join Zenith Aircraft Builders and Flyers