Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
Rt. Roof Rib (view toward center) forward section
Shows fuel shut off and grommet for fuel line into cabin. The taped on "L" angle must be installed after the rib is riveted to steel cabin frame with wing in place. Wing is needed for location of the "L" angle. The "L" angle is drilled and riveted to the rib first then drilled through bottom skin of wing as pilot holes for nutsplates later. Long forward tab below the cutout for the cabin frame allows wrapping around and riveting rib to the down tube for stability. Hinge is shown for later attachment to the door frame.
Comment
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2024 Created by Zenith.Aero.
Powered by
You need to be a member of Zenith Aircraft Builders and Flyers to add comments!
Join Zenith Aircraft Builders and Flyers