Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
Strut Bolted
Comment
-
Comment by Mark Colbeck on February 23, 2010 at 9:43am
-
I believe that I cut 1" or so off one and 3 to 4" off the other. I kept about 4 1/2" of overlap in the tube with the other tube. Plans call for minimum 4" overlap I figure more is better as long as it doesn't touch the welded portion.
-
Comment by Racer Hex on February 23, 2010 at 9:31am
-
nice picture, thanks...can you tell me if you had to cut the strut tube to fit or it was okay from the factory? Mine seems a little tight on the front and the rear strut seems almost 2 inches too long...thanks again
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2024 Created by Zenith.Aero.
Powered by
You need to be a member of Zenith Aircraft Builders and Flyers to add comments!
Join Zenith Aircraft Builders and Flyers