Installing the firewall float attachment bracket made by Zenair. Rotax 912S supported by walk behind fork lift. Loosen upper motor mount bolts, remove lower motor mount bolts and slide rebuilt Zenair float attachment bracket behind motor mount base against the firewall. The 1/8" thick float bracket will change motor angle, but not enough to worry about unless cowling issues around spinner. I have seen this simple walk behind fork lift unload CH750 crates from tractor trailers. This is at Can-Zac in Kitchener with Mark Townsend assisting. There is no interior in my CH750 because I am also installing the Baggage Panel Doubler kit after my baggage panel developed stress cracks at 80 hrs flight time. My paint and graphics are getting messed up on this repair.