Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
-
Fredrick Eugene Lawshe
- Covington, LA
- United States
- Blog Posts
- Discussions (3)
- Events
- Groups
- Photos (1)
- Photo Albums
- Videos
Fredrick Eugene Lawshe's Page
Profile Information
- Aircraft Model
- ZODIAC CH 601
- Project Status
- Other
- Building From
- Purchased finished aircraft
- Engine installed (or plan to install)
- Other
- Building Experience
- Have worked on airplanes before
- Flying Experience
- Commercial / CFI
- Building and Flying Info / Your Profession / Other Background Info
- Ap/iA approx 15,000 hours
- Home Airport (ie. KMYJ)
- 2r7
Fredrick Eugene Lawshe's Photos
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2024 Created by Zenith.Aero.
Powered by
Comment Wall (2 comments)
You need to be a member of Zenith Aircraft Builders and Flyers to add comments!
Join Zenith Aircraft Builders and Flyers
Contact me directly
Bradfnp@gmail.com
Have cut the canopy for an RV-7. What we did is use multiple layers of masking tape each side of the cut, then use many passes with a thin zip cut disc on a die grinder.Just make a mark at first then with the next pass take off a little more. continue deepening the cut until the pieces separate. ensure the pieces either side of the cut are well supported so you don't have any induced stress.