Lucas Suthers
  • Monroe, WI
  • United States
Share on Facebook
  • Blog Posts
  • Discussions
  • Events
  • Groups
  • Photos (2)
  • Photo Albums
  • Videos

Lucas Suthers's Friends

  • Julio Marques Vieira
  • Dwight Early
  • Richard Rost
  • Christopher Desmond
  • Wayne Clagg
  • Zenith.Aero
 

Lucas Suthers's Page

Profile Information

Aircraft Model
STOL CH 701
Project Status
Just started
Building From
Partial kit
Building Experience
No Experience
Flying Experience
None
Building and Flying Info / Your Profession / Other Background Info
Blacksmith/Machinist/Welder

Lucas Suthers's Photos

  • Add Photos
  • View All

Comment Wall (4 comments)

You need to be a member of Zenith Aircraft Builders and Flyers to add comments!

Join Zenith Aircraft Builders and Flyers

At 11:52am on July 16, 2010, Julio Marques Vieira said…
Hi Lucas! Wayne is correct, compression 8.0 to 1. Good Job! We will fly a lot with VW!!! Let's do it!
At 1:39pm on July 7, 2010, Wayne Clagg said…
Actually I reduced the number of fins by one per cylinder, reduced the compression to about 8.0 to 1 with copper head gaskets and did a three angle valve job. I still have good cooling and the engine seems to make equal power compared to the other heads with the lower compression ratio even though the density altitude is much higher now. Stay tuned.
wayne
At 9:08pm on June 11, 2010, Wayne Clagg said…
Hi Lucas, the long and short of it is yes, something happened to the originals. When I began expeimenting with the fat fin mod I used a set of heads that had been cooked for 60 hours and had the bottom plug holes stripped. I installed helicoils and brazed on the fins. I even used the old exhaust valves.
The exhaust valve on #2 would not stay adjusted from the first start up, it kept getting tight but everything else worked very well. I had a few fins crack loose on the other head but all went well until about 11.8 hours when I decided to pull the head and investigate the valve issue. When I pulled the head it was cracked between the intake and exhaust port, around a plug and the the seat was loose all problems I blame on the past heating issues. None of the other valves needed any adjustment. I had a set of GPASC heads that had been rebuilt and I decided to use the info gathered from testing the originals to make a slightly modified version. I have to say that the fat fin mod is a huge success even though I have only 11.8 hours of testing. I did not want to use a good set of heads for the original test so that is why I used the old junk heads. I didn't want to be out a ton of cash it turned out to be a flop.
If you are interested get back in touch with me in a few weeks and I'll let you know how the new ones work.
At 8:16pm on March 27, 2010, Wayne Clagg said…
Lucas, I used some stuff called Durafix. No flux. There are some videos on you tube about using it. I have a $3500 tig welder but I wanted to try this stuff so a dude in his garage could do it. So far it has worked well. If you decide to try it let me know and I'll give you some pointers. I have documented this extensively on the AirVw and Aeroconversions groups on yahoo. "Fat Fin Head" is the name of the thread. I see you are a welder so you might be better off tig welding them or mig with a spool gun but without a doubt you should do the mod. Look at my numbers on the groups. I've had all kinds of trouble with temps, until I did the mod. Read all you can and you decide for yourself but I can tell you without question you will glad you did it. BTW, I use mofoco 042 also and they are hands down better than the 042 chinese stuff from Great Plains. I tried em both.
Wayne
 
 
 

New from Zenith:

Zenith Planes For Sale 
 

Classified listing for buying or selling your Zenith building or flying related stuff...


Custom Instrument Panels
for your Zenith
:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.


Zenith Homecoming Tee:


Zenair Floats


Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz


Builder & Pilot Supplies:

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.