Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
-
Ralph E. Wishart
- Male
- Drottningholm
- Sweden
- Blog Posts (1)
- Discussions (1)
- Events
- Groups
- Photos (8)
- Photo Albums
- Videos
Welcome, Ralph E. Wishart!
Profile Information
- Aircraft Model
- STOL CH 750
- Project Status
- Less than half
- Building From
- Plans-only
- Building Experience
- No Experience
- Flying Experience
- Sport Pilot (or Ultralight)
- Building and Flying Info / Your Profession / Other Background Info
- Have flown since kid, have worked on wood industry in Brazil, Shipping industry in Sweden; I used to sail a lot, but changed my intrest to aircraft recently. I fly paraglider and paramotor as well
Ralph E. Wishart's Photos
Ralph E. Wishart's Blog
750´s stabilizer spars
Posted on August 4, 2012 at 2:34pm 3 Comments 0 Likes
Hi folks,
I´m about to bend the H-tail feather spars to my plans built 750. The manual gives me a dl for the stabilzer front spar blank of 141mm while the flanges are 20mm and web 107mm. As I suspected the dimmentions didn´t add up when I ran a test piece. I ended up 3 mm short on the web after compensating 1mm for each of the flanges. The next time I tried, I had the web + flanges -2mm compensation for the bend radii (107+(2x20)-2=145 dl) now I am 1mm on the plus side on the web. All…
ContinueNew from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
Switch to the Mobile Optimized View
© 2024 Created by Zenith.Aero.
Powered by
Comment Wall (5 comments)
You need to be a member of Zenith Aircraft Builders and Flyers to add comments!
Join Zenith Aircraft Builders and Flyers
Hi Ralf Wishhart!
Thanks for the words....
be good!
Obrigado pelas palavras! Thanks for the words.
Se vier ao Brasil me avise e vamos voar! If you decide to go to Brazil pls keep me advised and let's fly
Abracos
Regards
Welcome to the family.
I wish you the all the best with your project. If you ever get the chance to visit the Zenith factory please take the time to stop by our builder assist facility too. We are their newest
and nearest builder assist facility and like to have visitors. We are right here in Mexico, Mo., not far from them as well.
Take care and good luck,
Bill Carter
American Light Sport Aircrafters
Builder Assist & Assembly Center
www.LightSportAircrafters.com
Hej
Låter som en klok idé, att ta ett steg i taget. Känns rätt överväldigande annars..
Vilken motor väljer du? Varför inte ta samma, en Corvair. Spar pengar och passar dessutom ännu bättre till CH750. Kolla Flycorvair.com, jag köpte deras manual. Synnerligen trovärdig. Så nu letar jag efter "rätt" motor att bygga om.
Och, är Arigo enda källan? Måste finnas matchande kvaliteter via ordinarie plåtsäljare. Helpgängets scratch-DVD visar just roderplåtarna. Använd gärna min epostadress, resten här är troligen usla på svenska. sten.backhans@sll.se
Hej Ralph
Så roligt att höra. Fler galningar..
Jag är snart pancho, har börjat leta fram kunskap och komponentkällor. Tänker också bygga om en Corvairmotor för flygetyget. Finns manualer för allt, tycks det. Köpte en DVD från Homebuilthelp om scratchteknik, rätt ok.
Har du kommit nån vart?
hälsar
en intresserad
Sten