Hi Walt, I saw pictures of your 701 with a canard (at least I think it was you!) and I would love to learn more about it. Are you still active on this forum? Thanks

Hello,

My name is Mr. Michael Mccarthy, I have contacted you before without any response from you. Please replied if you receive this message. I have something very important to discuss with you, I have a vital information to give you. Could you please get back to me on (mmichaelmccarthy4@gmail.com ) for full details.

Michael Mccarthy.

Hi Walt, I found those same measurements on your comment wall. Once mine are mounted, in roughly a month is my goal, I will let you know what I ended up with. I have to machine up my fittings and go from there. Going to run around 6-7 degrees of incidence, since with the 80hp I need as much lift as I can get for take-off. 

Walt the three measurements are 29 -53 -34 BOB

Hi Walt,

Regarding the bubble door installation, I found that I had to trim the upper door sill channels 20 mm in order to get the doors to fit in the opening. If your upper sills are 80 mm per the drawings, I doubt the doors will fit. It might be practical to cut the bottom 20 mm off the installed channels and slip in a new, short channel...

Steve

Hi Walt, No, by purchasing the pre-drilled kit, you are way ahead of me.  When you work from the basic kit, it is very near a plans-built project, as you have to cut all the extrusions, brackets, hinges, etc. from stock aluminum angles.  Also have to cut all sheet metal from stock.  then drill everything.  The kit is basically raw material except for the welded parts, some pre-bent parts, and off-the-shelf items.  I did enjoy making all the parts, though, it wasn't that difficult, just ook more time. I'm retired now, so have more time and less money....so that worked out good for me.  I'm building the plane in parallel witht he floats.  Have the rudder, slats, flaperons, stab, elevator  completed; wings completed to closing the top skin (waiting for some fuel system items).  Have the fuselage kit, but haven't started it yet. It was my retirement dream to build a plane, and now it's here!  Best of luck with your floats and let's keep in touch and compare notes.

Thanks!  Frank

Hi Walt, I'm building the 1450A floats from the basic kit.  Almost to the level of the pre-drilled kit.  Just have to add the front bottom skins, the front pick-ups, front nosewheels and the walkways, then I can start re-assembling too.  A real fun project!  Love the photo of your 701!  Frank

Walt

i just saw you're with Boeing. i spent some time in those...like 15 years in the left seat of the 727. they were just the best...if something was broken and you gave it a few legs it would fix itself. great  birds. finished up in the a300. a POS in my opinion but it did have a good heater. nothing like "made in USA"

thanks for those planes

Joe

Thanks Walt, and Happy New Year

Best

joe