Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
Perry Delano's Blog – May 2016 Archive (1)
CH-701 Cabin Frame Jigging
Re: Jigging 701 Cabin Frame
Following the procedures in the plans and manual for levelling fuselage, Hz tubes on cabin frame and engine mount, I jigged drilled and cleco'd the cabin frame to the AC. I supported the assembly at the
bottom of the firewall to get everything level (Fwd fuse is rivetted to rear fuse). When all was done I pulled the support from under the firewall, and of course everything sagged a bit leaving
the side tubes with a slight decline angle from level…
Added by Perry Delano on May 29, 2016 at 1:00pm — 1 Comment
Latest Blog Posts
Most Popular Blog Posts
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2024 Created by Zenith.Aero.
Powered by
