Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
Hi all...anybody have an easy solution to the flapper on hinge bushings, kind of a oddball size. Thanks
Comment
-
Comment by Todd Loomis on November 9, 2013 at 1:10pm
-
I just got done making mine. I used a small pipi cutter to cut the approx length and then. I made a jig out of oak with a 1/4 inch hole cut through by useing another an4 bolt I
I was able to make a square cut on it. Worked real slick.
-
Comment by phassinger on October 18, 2013 at 2:15pm
-
Whoops...just found it. Thanks again
-
-
Thanks Roger. What did you use for stock?
-
Comment by Roger Wibbels on October 18, 2013 at 12:42pm
-
I'm in the process of fabricating mine right now. On mine I find that 5.5mm is a bit too small for the bushing. It binds when tightened. I'm having to make them closer to 6mm. Using a small pipe cutter is almost a must.
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2024 Created by Zenith.Aero.
Powered by
You need to be a member of Zenith Aircraft Builders and Flyers to add comments!
Join Zenith Aircraft Builders and Flyers