Online Community of Zenith Builders and Flyers
Alright who is the dynon wizard? Helping finish a 801 with vertical power electrical system and dynon skyview. Surely not the first to have this set up
Join Zenith Aircraft Builders and Flyers
Not a Dynon, but I put a GMU-11 magnetometer in the rear fuselage section of my 801. No interference. Works great. Let me know if you want location pics.
I can't speak specifically for the 801, but they usually go behind a rear seat or bulkhead because there's far less chance of magnetic or electronic/RF interference back there, and it's usually far easier to get them perfectly level there.
I'm fairly familiar with Dynon installations, but if you have a detailed question, it might be better to post it on the Dynon forum where more homebuilders can contribute, and where other builders are more likely to benefit from the information.
Welcome toZenith Aircraft Builders and Flyers
Sign Upor Sign In
Or sign in with:
Zenith Planes For Sale
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings: A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
West Coast USA:
Pro Builder Assistance:
K&S Aviation Services
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2024 Created by Zenith.Aero.
Report an Issue |
Terms of Service
Exlusive online community for active builders and pilots of Zenith Aircraft kits (Chris Heintz / Zenair light airplane designs).
Please check your browser settings or contact your system administrator.