Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
Center Wing, time to debur
Top skins and nose skin is in place drilled to A5 with strips and plates in place as well as L angles rear of strips and connecting I/b gear box rib and adj. nose ribs. (I should shim these where they attach to the skins?) I cut out excess nose skin, will trim at some point in the future. Getting ready to tear down and debur. I am now struggling with the question as what I can rivet without causing myself future rivet removal adventures. For instance, the top skins do not get riveted due to the seat installation. Is it ok to rivet the bottom skin to the ribs (not the Zee)? Anyone have any thoughts? (TD 601 HD)
Comment
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2024 Created by Zenith.Aero.
Powered by
You need to be a member of Zenith Aircraft Builders and Flyers to add comments!
Join Zenith Aircraft Builders and Flyers