Online Community of Zenith Builders and Flyers
I finally managed to get the leadig edge skin drilled for my Zenith 650. I would say this is the most difficult challenge I have faced in this project so far.
I think the biggest feature of what was done was to figure out a way to hold the ribs steady so I can take measurements to transfer from the ribs to skin and also make sure the ribs do not move when trying to fit the skin and for drilling as well. Some of this can be seen in the thumbnail for the video below. The jig will remain in place until I am ready to install the fuel tank.
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2024 Created by Zenith.Aero. Powered by
Exlusive online community for active builders and pilots of Zenith Aircraft kits (Chris Heintz / Zenair light airplane designs).
You need to be a member of Zenith Aircraft Builders and Flyers to add comments!
Join Zenith Aircraft Builders and Flyers