Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
My first post!
Today I drilled the longerons for the left aft side fuselage skin. Also cut the lateral stiffeners. This is my first post to the group. I started the project at a Zenith workshop on 5/21/15. I have completed the rudder, horizontal stabilizer, elevator and trim tab, bottom aft fuselage skin and right aft fuselage skin. I have had to be out of town for about half of the time since I started the project. Won't have to travel as much in the future and plan to spend more time on the plane. I plan to install a Lycoming O-320. I would like to hear from other builders, especially if you are in Florida or you are installing a Lycoming engine. Building tips are always welcome!
Comment
-
Comment by Charlie Menger on July 12, 2015 at 6:14am
-
Thanks Steven, I'm excited to be here!
-
Comment by Steven Ward on July 11, 2015 at 8:52pm
-
Welcome aboard!
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2024 Created by Zenith.Aero.
Powered by
You need to be a member of Zenith Aircraft Builders and Flyers to add comments!
Join Zenith Aircraft Builders and Flyers