Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
prop help do i make shims for were my finger is and a bace for the bottom its a 3 blade
Comment
-
Comment by Frank A Pisz on July 8, 2016 at 4:45pm
-
Hi Thomas! Sorry this response is so late, I didn't see your request. The length of the spacers on my propeller bolts is 0.502 inches. Frank
-
Comment by thomas trinque on July 5, 2016 at 8:48pm
-
thanks order the parts form Viking today they had them in stock
-
-
ok thanks any way you could get the length of spacers thanks.
-
-
Hi Thomas! In the coment below, the "xxxxx" was "Whirlwind" prop. Sorry about that. Frank
-
-
Hi Thomas! I'm not sure if you have the same propeller/spinner combination as I do
(I have a Helmet Spinner and a 3 blade xxxxxxxxx prop) I have bushings in the location where your finger is:
The plane has not yet flown, but the engine has run with the propeller attached in this manner and everything appeared to be fine. Regards, Frank
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2024 Created by Zenith.Aero.
Powered by
You need to be a member of Zenith Aircraft Builders and Flyers to add comments!
Join Zenith Aircraft Builders and Flyers