Online Community of Zenith Builders and Flyers
Yesterday, I finished drilling the remaining spar pilot holes and then followed up by drilling out to #21. I will put an angle on the Spar Web Doubler when I go to our chapter meeting next Saturday (my bending brake cannot handle .063" metal). Will pre-mount it later in the day.
Comment
When I made my spar doublers I first put the bend into a strip 0.063 that was more than long enough for both pieces. I bend both ends of the strip. Then I cut the parts out. It was much easier to cut the parts to the correct size than trying to predict the correct developed length.
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2024 Created by Zenith.Aero. Powered by
Exlusive online community for active builders and pilots of Zenith Aircraft kits (Chris Heintz / Zenair light airplane designs).
You need to be a member of Zenith Aircraft Builders and Flyers to add comments!
Join Zenith Aircraft Builders and Flyers