Online Community of Zenith Builders and Flyers
working on horizontal stab. parts
working on parts for horisontal stab. Just have to make some type of brake with 6.4 mm radius to bend parts. What are most of u bending these parts with. I see when I get to firewall stiffeners I have to make a bend almost 900 mm long. Not sure if I can bend these over a peice of wood or not. What is the best way to do this without making another brake?
Comment
-
Comment by Chris Aysen on February 13, 2012 at 9:22am
-
Jesse - You really would need a metal brake. My two cents.
Chris
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2026 Created by Zenith.Aero.
Powered by
You need to be a member of Zenith Aircraft Builders and Flyers to add comments!
Join Zenith Aircraft Builders and Flyers