Zenith 750 Cruzer project s/n C75-10769

Located at AKH in EAA Chapter 309 hangar

Status:

Fuselage structure is built and, the engine is hung and fuselage is standing on the landing gear.

Nosegear installed with updated “donut” discs in place of original bungee shock suspension

Wings are built and in wooden cradle; the wing tanks (2 x 15 gallon) are installed

Fin and rudder are built and have been fitted, but not installed

Flaperons are built, but not installed

Horizontal tail (stabilizer, elevator, mass balance and trim) have been fitted, but not installed

Doors with 3 “ bubble windows installed

Center console option fitted

Sliding seat option installed both seats

Instrument panel (hinged) built: capacitors, contactors, hinged battery boxes installed

Switches installed 

breakers installed

Major steel parts powder coated

Shoulder harnesses fitted

Controls:

Center control (“Y”) stick installed 

Trim motor installed

Trim switch installed in each grip

Rudder pedals and brakes (both sides) installed

Factory-swaged control cables- partially installed

Flaperon mixer (powder coated) and flap motor installed

Powerplant:

UL Power 350i 0 hrs TT

Hung on Zenith mount (powder coated)

Optional 50 Amp alternator installed

ECU fitted

Coils fitted

Propeller:

Sensenich 68” composite ground adjustable with spinner (never fitted or installed) 0 hrs TT

Lights:

AEROLEDS Pulsar wing nav/strobe lights fitted

Fuel System:

Gravity feed from wings to header tank then gravity feed to dual fuel pumps

KUS SSS/SSL tank senders (in all three tanks)

Fuel shut off valves (3)

Header tank - mounted behind baggage back with sump 

Fuel filters installed

Dual fuel pumps installed

Instruments: (DYNON SKYVIEW) 

Pitot with AOA mounted on left wing

SV-COM-CX25 radio installed 

SV stereo intercom and switch panel

SV-HDX1100A 10” SKYVIEW touch display installed 0 hrs TT

SV-ADAHRS installed

SV-EMS-220/A engine monitoring module

SV=GPS-2020 GPS antenna/receiver 

Antennas

SV-XPNDR-261 MODE-S CLASS 1

SV-ADSB-472 ADS-B DUAL BAND TRAFFIC & WX

EGT SENSORS

CHT SENSORS

ENGINE SENSORS 

APPROACH WIRING HARNESS

Guardian iPad Pro 11 USB-C in panel mount and charger installed (iPad not included)

Drawings;

2 sets of factory drawings: most recent p/n C750-D-U edition 2 12/18/16

2025-02-26 v.4