Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
Ken Ryan's Likes
December 2022
Engine break-in run
<a href="https://www.youtube.com/watch?v=VgsbqS4w-qYPosted">https://www.youtube.com/watch?v=VgsbqS4w-qYPosted</a> a video on YouTube running the AM15 in my backyard. See link. Engine runs well. Oil pressure is low in this video. I recalibrated the MGL EFIS to rea…
Discussion
Engine break-in run
3 Likes
Finally flying: STOL CH 801
Discussion
Finally flying: STOL CH 801
12 Likes
July 2022
Nylon fiber deburring wheel: cheap & works w…
Maybe it's due to supply chain issues, but where I live the 3M Scotch Brite silicon carbide deburring wheels are super expensive now ($230 each), so I decided to try one of the cheap nylon fiber poli…
Discussion
Nylon fiber deburring wheel: cheap & works w…
1 Like
June 2022
First flight! Corvair Cruzer
photo
First flight! Corvair Cruzer
9 Likes
May 2022
First Flight Landing Scores
photo
First Flight Landing Scores
5 Likes
Watch the landing: Zenith STOL CH 701 Taildr…
video
Watch the landing: Zenith STOL CH 701 Taildr…
4 Likes
April 2022
Facebook content only?
I often see stuff noted here that Zenith has posted on Facebook. But I don't have Facebook and don't want it. Why can't they post it here too?
Discussion
Facebook content only?
6 Likes
Aeromomintum cowl fitting issues
Hi Zenith Builders;
I had a great time at Sun N Fun 2022 yesterday. While there I stop by the Aeromomintum display and spoke with Mark and Lilli about the cowling issues I'm having. Mark said the gu…
Discussion
Aeromomintum cowl fitting issues
1 Like
January 2022
Aeromomintum cowl fitting issues
When fitting a cowl you trim small pieces at a time. Very time consuming but it's beginning to look good. Some of the issues I'm finding are as you can see in the pic's the cylinder head side didn't…
Discussion
Aeromomintum cowl fitting issues
1 Like
Aeromomentum Cowl
Finally got my cowling for the AM15 engine. Waiting on the 1 1/2" prop spacer to come in before I can fit the cowling. This has been a long wait. I've had the engine since Sept. 2020.
Discussion
Aeromomentum Cowl
4 Likes
March 2021
Wing strut fairings
I am experimenting with fairings for my wing strut attach points.
My method is to design the fairing in solidworks, and then print male and female mold with a small offset. The offset is designed to…
Discussion
Wing strut fairings
4 Likes
November 2020
Mike Patey
For those keeping up with Mike Patey, he started Scrappy for the first time, and it is loud.
Discussion
Mike Patey
1 Like
October 2020
Never Say Never - The Slats Are Back!
When I built my STOL 750 about 9 years ago, the Cruzer did not exist. I had a 2100' turf strip and all my buddies had strips at least as long. So, not needing "superSTOL" capabilities, nonetheless…
Discussion
Never Say Never - The Slats Are Back!
21 Likes
August 2020
Passenger door total failed in flight CH-75…
Last week while in a descending left turn the passenger bubble door imploded into the cockpit trapping the control stick within fiberglass frame parts and broken plexiglass in a full left and forward…
Discussion
Passenger door total failed in flight CH-75…
3 Likes
deleted
see more recent post for this ad further down the list
Discussion
deleted
2 Likes
July 2020
Fuel Sender Access Covers
When I purchased the incomplete 750 project from the original owner/builder 7 years ago, he had already installed the fuel tank senders. As most know, they are '68-77 VW tank senders and the quality…
Discussion
Fuel Sender Access Covers
3 Likes
June 2020
Praetor helmet update
I've had a few flights now while wearing the helmet and I have to say that wearing the helmet in the airplane is a non-event. Putting it on and off has already become second nature and there are no…
Discussion
Praetor helmet update
4 Likes
March 2020
Sunset: What A View!
photo
Sunset: What A View!
15 Likes
February 2020
Flight with Ginger: Roger goes flying with J…
video
Flight with Ginger: Roger goes flying with J…
9 Likes
November 2019
Viking 130 Cowl Modifications
We experimented with our cowl last summer to get better cooling during extended climbs. As many know, the summer days in south central and interior Alaska does get hot from time to time. The engine…
Discussion
Viking 130 Cowl Modifications
5 Likes
September 2019
Viking Talks Part 2 - FAQ - You Asked, We An…
As we continue on with this series please continue to ask questions or let us know content you may want to see moving forward. -Alissa
Discussion
Viking Talks Part 2 - FAQ - You Asked, We An…
4 Likes
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2024 Created by Zenith.Aero.
Powered by
