WANTED - Control Cable Tension Meter
Just wondering if anybody out there has a control cable tension meter, for example a Burroughs BT 33-75 or similar, 10-70Lb for 1/8" lines. I am based in the UK but willing to pay shipping etc. See More
Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
-
Michael Shewan
- Male
- Peterhead
- United Kingdom
- Blog Posts
- Discussions (64)
- Events
- Groups
- Photos
- Photo Albums
- Videos
Michael Shewan's Discussions
WANTED - Control Cable Tension Meter
Started this discussion. Last reply by Arnie Minear May 19, 2022. 2 Replies 0 Likes
Just wondering if anybody out there has a control cable tension meter, for example a Burroughs BT 33-75 or similar, 10-70Lb for 1/8" lines. I am based in the UK but willing to pay shipping etc. Continue
350i Can Bus outputs
Started this discussion. Last reply by Michael Shewan Dec 9, 2021. 2 Replies 0 Likes
I am at the stage of wiring up my panel etc, have the Dynon Skyview system with the EMS 221 module, I intend to use the Can Bus for the main engine sensors. Does anybody know if there is an…Continue
Homebuild Help DVD's Zenair 601XL 650b
Started Aug 17, 2021 0 Replies 0 Likes
I have the Homebuild Help DVDs for 601 XLB / 650B Wing construction (2 discs) and part 1,2 & 3 fuselage section (6 discs). All in as new condition, they cost $160 new, will to sell for $80 +…Continue
912 Intermittent misfire
Started this discussion. Last reply by Wayne Woloshin Jun 26, 2020. 1 Reply 0 Likes
I have an intermittent misfire on the 912 ULS fitted to my 601. This happened previously and eventually it turned out to be a slack earth wire on one of the SMD's. Since then it has been running just…Continue
Michael Shewan's Page
Latest Activity
350i Can Bus outputs
I am at the stage of wiring up my panel etc, have the Dynon Skyview system with the EMS 221 module, I intend to use the Can Bus for the main engine sensors. Does anybody know if there is an alternator current output on the Can Bus or would I have to fit a separate shunt and feed that into the EMS? See More
912 Intermittent misfire
I have an intermittent misfire on the 912 ULS fitted to my 601. This happened previously and eventually it turned out to be a slack earth wire on one of the SMD's. Since then it has been running just fine, until last weekend, just after take off you can feel it misfire, does it for a few mins then seems to clear up.I have checked all the usual suspects, sinking floats, contamination, rubber carb flange, spark plug and gaps etc. I cannot seem to replicate it on the ground, on mag check around…See More
Profile Information
- Aircraft Model
- Zenith CH 650
- Project Status
- Flying
- Building From
- Kit
- Engine installed (or plan to install)
- UL Power
- Building Experience
- Have already built an airplane
- Flying Experience
- Private Pilot
- Home Airport (ie. KMYJ)
- EGPD
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Custom Upholstery Kits for your Zenith Aircraft:
Zenith Vinyl Upholstery Kits
Zenith Apparel from EAA:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
© 2023 Created by Zenith.Aero.
Powered by
Comment Wall
You need to be a member of Zenith Aircraft Builders and Flyers to add comments!
Join Zenith Aircraft Builders and Flyers