Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
Tow bar pouch
HI purchased a tow bar with my Cruzer but it was too long to comfortably carry in the back of the plane. I cut the long bars at about 18 inches and made some plugs. Welded them to the open ends and painted. Slid the tang end over the plug and then drilled some 1/8 inch holes for the pin clips. Sewed up the bottom half of an old umbrella cover and made a carrying pouch. Should be much easier to carry on trips.
- Attachments:
Replies to This Discussion
-
Permalink Reply by Gary Welch on
-
Great idea! I made my own tow bar and did make it so it folds in half. The pouch would make it easier to get in and out of the plane without dinging something.
"Linda!!, I have a job for you...."
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2024 Created by Zenith.Aero.
Powered by
