Replies to This Discussion

Permalink Reply by Dan Hill on July 1, 2020 at 7:32pm

standard double edge deburring tool, looks like a Noga. Here is a amazon link https://amzn.to/3f4fpLf   but you should be able to get it fron any industrial machine tool supplier.

• ▶ Reply

Permalink Reply by Jim and Amelia Isaacs on July 2, 2020 at 6:41am

https://www.aircraft-tool.com/shop/detail.aspx?id=G480 

$21 but I think they are having a 20% off sale right now.

• ▶ Reply

Permalink Reply by Damon Brantley on July 3, 2020 at 10:17pm

Be careful of the amazon one. I was going to order one too and noticed a delivery date of 1-2 months when I checked out.

I canceled that one and ordered off of ebay and verifiied the supplier was in the US。 Presumably I will have it by the end of next week.

• ▶ Reply

Permalink Reply by Dan Hill on July 3, 2020 at 10:42pm

I used amazon as a reference and didn't check availibility, a quick check shows both travers tool and msc have them in stock. as a society and also as builders we now go first to amazon and the dedicated aircraft supply sources, they are not always the best or least expensive source for tools or materials. As a scratch builder I can almost always source the same materials from a local supplier for at least 1/3 less and no shipping. I usually cant save as much on tools and supplies, but it is worth the time to research possible sources as savings can sometimes be had.

• ▶ Reply

Permalink Reply by Carl Orton on July 5, 2020 at 8:03pm

Spruce has them as well. 

• ▶ Reply