Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
-
Simon Lugg
- Male
- Houston, TX
- United States
- Blog Posts
- Discussions
- Events
- Groups
- Photos
- Photo Albums
- Videos
Simon Lugg's Page
Profile Information
- Aircraft Model
- STOL CH 701
- Project Status
- Less than half
- Building From
- Kit
- Building Experience
- Have worked on airplanes before
- Flying Experience
- Sport Pilot (or Ultralight), Commercial / CFI
- Building and Flying Info / Your Profession / Other Background Info
- Self employed software developer
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2024 Created by Zenith.Aero.
Powered by
Comment Wall (2 comments)
You need to be a member of Zenith Aircraft Builders and Flyers to add comments!
Join Zenith Aircraft Builders and Flyers
I have the same engine mount from Great Plaines and engine from them as well. Redrive is from Valley Engineering.
I have no baffling system under the cowling at this time. It seemed to complex of an effort because I have dual Bing carbs mounted near the heads. My hope is that with the heads outside of the cowl that would be sufficient. I am going to install two air inlets on the top of the cowl to direct air across the oil cooler. This should also improve overall cooling effect.
I will also install a prop spinner to smoothe air flow through the inlets on the nose bowl.
Gary
I am just now in the early stage of taxi tests. So far, temps are within limits. With the heads outside of the cowling there seems to be a greater cooling effect.