Spinner for whirlwind prop
Looking for spinner and backplate plate for Whirlwind prop. I have a jabiru 3300.See More
Online Community of Zenith Builders and Flyers
-
Bobby Egger
- Walkerton, IN
- United States
- Blog Posts
- Discussions (11)
- Events
- Groups
- Photos (1)
- Photo Albums
- Videos
Bobby Egger's Discussions
Spinner for whirlwind prop
Started on Tuesday 0 Replies 0 Likes
Looking for spinner and backplate plate for Whirlwind prop. I have a jabiru 3300.Continue
Prop Issues
Started this discussion. Last reply by John Austin Sep 3. 1 Reply 0 Likes
Has anybody had a problem with keeping your back cylinder cool when switching from a Sensenich wood prop to a Whirlwind prop? Engine stays cool with the wood prop. I put the Whirlwind prop on and set…Continue
Air/Oil Separator
Started this discussion. Last reply by Bobby Egger Aug 21. 4 Replies 0 Likes
I was wondering if anybody had any line on an Air/Oil Separator for my Jabiru 3300. Continue
Eratic Tach
Started this discussion. Last reply by Bobby Egger Aug 12. 9 Replies 0 Likes
I have a CH750 with a Jabiru 3300 Gen 2. The Engine has around 220 hours on it. Runs great. I am running a Dynon D180. The issue I am having is when the engine is at idle the tach goes to zero. The…Continue
Bobby Egger's Page
Latest Activity
Prop Issues
Has anybody had a problem with keeping your back cylinder cool when switching from a Sensenich wood prop to a Whirlwind prop? Engine stays cool with the wood prop. I put the Whirlwind prop on and set the pitch at 15.5 degrees and the back cylinder gets warm? Any help or ideas would be greatly appreciated. See More
Air/Oil Separator
I was wondering if anybody had any line on an Air/Oil Separator for my Jabiru 3300. See More
Eratic Tach
I have a CH750 with a Jabiru 3300 Gen 2. The Engine has around 220 hours on it. Runs great. I am running a Dynon D180. The issue I am having is when the engine is at idle the tach goes to zero. The tach reads once the RPM's get to 1000. When flying and i reduce the power the tach goes eratic? Looking to see if anyone else has had this problem. See More
Profile Information
- Aircraft Model
- STOL CH 750
- Project Status
- Flying
- Building From
- Purchased finished aircraft
- Engine installed (or plan to install)
- Jabiru
- Building Experience
- Have worked on airplanes before
- Flying Experience
- Sport Pilot (or Ultralight)
Bobby Egger's Photos
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2026 Created by Zenith.Aero.
Powered by
Comment Wall
You need to be a member of Zenith Aircraft Builders and Flyers to add comments!
Join Zenith Aircraft Builders and Flyers