Online Community of Zenith Builders and Flyers
Sort by:
Discussions | Replies | Latest Activity |
---|---|---|
Lycoming mechanic in Ohio??My 801 has a Lycoming O-360 that needs a new oil seal installed behind the prop. It looks like I would need to completely disassemble it t… Started by Jay Herron |
3 |
Jul 31, 2016 Reply by Jay Herron |
3300 jab motor mounted on a CH601 UL. Has anyone done thisHas anyone done this conversion Jab 3300 mounted on a CH 601 HL Started by Rob Matthews |
7 |
Jul 28, 2016 Reply by John Austin |
701 Nose gear shock cordHi all, I've just removed the Shock Ring on the nose gear as it needs to be replaced because its frayed and over 5 years old. I measured th… Started by Martyn Maddock |
19 |
Jul 24, 2016 Reply by John Flavin |
opinions on the Subaru engineWhat is the considered opinion of the group? Should I buy a 601XLB with a Subaru engine or keep mine with a Jabaru 3300? Started by Carl Eichenauer |
2 |
Jul 22, 2016 Reply by Carl Eichenauer |
Illinois tax HELPAnyone from Illinois dealt with paying the taxes once complete? What forms do I need and whatever else? Thanks Started by Ed G Novak |
1 |
Jul 19, 2016 Reply by BJ Ramsey |
Your experience with Harbor Freight rivet gun?From looking at the forums, I know I *can* use the Harbor Freight rivet gun to build a Zenith, with the mods to the tip. If you did use th… Started by Brian Thomas |
28 |
Jul 19, 2016 Reply by Ed G Novak |
Attending Oshkosh 2016? Bulletin Board and ListFor those attending Air Venture 2016, below is a list for those that would like to list their name and info for others that may want to con… Started by Walt Snyder |
6 |
Jul 19, 2016 Reply by Joe Harrington |
Alternative for carb cable "B Nut"I'm helping a buddy restore a '48 Stinson. Recently, he attempted to order a "B-Nut" from Spruce to clamp or terminate the mixture cable. F… Started by John Austin |
8 |
Jul 18, 2016 Reply by Ronald J Stamschror |
ELTHi to All I am at the point of getting an ELT with antenna, radio and transponder and wonder what others are using? I am going to use a GRT… Started by William (Bill) Blackmore |
6 |
Jul 18, 2016 Reply by François Balaux |
General Hole RepairHello Fellow Builders, I incorrectly drilled the first hole #40 through the nose elevator skin when mounting..then realizing it was misalig… Started by Aaron Steines |
3 |
Jul 18, 2016 Reply by Aaron Steines |
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2024 Created by Zenith.Aero. Powered by
Exlusive online community for active builders and pilots of Zenith Aircraft kits (Chris Heintz / Zenair light airplane designs).