Online Community of Zenith Builders and Flyers
Sort by:
Discussions | Replies | Latest Activity |
---|---|---|
Phase One Documentation?To those of you already flying, I have a question, I realize that we are required to show compliance with FAR 91.319 during our Phase One… Started by brad cohen |
3 |
Dec 5, 2015 Reply by John Austin |
Engine runs rough when landingHey all my 912 rotax ul runs rough when landing its ok above 3000 rpm. from 2200 to 3000 rpm its shakes on the ground. New plugs and wires… Started by David McCusker |
6 |
Dec 1, 2015 Reply by Juan vega |
Jabiru Motor MountsHello all. Doing my annual. I am thinking about changing out my motor mounts for the Jabiru. I see that some folks have been using the S… Started by Matt Archer |
2 |
Nov 30, 2015 Reply by Matt Archer |
Zenair CH250Hello all. I was considering selling my 2004 CH250 and possibly moving into a STOL. I haven't the slightest idea on what the market looks… Started by Ted de groot |
8 |
Nov 29, 2015 Reply by Sherald McCarthy |
Ch-100 Engine MountCurious if anyone out there has a fabrication drawing for a VW mount for the CH100 as I am restoring S/N 0001 and part of the process is ma… Started by Adrian Meilleur |
1 |
Nov 27, 2015 Reply by Sherald McCarthy |
Vortex generators on a 601XLHas anyone used VG"S on their 601. If they have, could you comment on your experience with them. Started by William Campbell |
2 |
Nov 26, 2015 Reply by Bob McDonald |
Tire-pressure sweet spot?This is primarily for 701-750 folk, but anyone can comment. I'm trying to work out the tire pressure that will give me maximum soft-field… Started by Wayne Tyson |
4 |
Nov 25, 2015 Reply by Wayne Tyson |
EMS Span alarms?Hello All, I have a dumb ass question for those of you with am EMS system (GRT, Dynon, JPI) What is the benefit of a "Span Alarm"? I mean… Started by brad cohen |
1 |
Nov 23, 2015 Reply by Timothy D. McCall |
Scratch build ribs: forming sheet metal around forming blocksDid someone try using a method like that to make ribs? https://www.youtube.com/watch?v=EWGAIVDpDLc What kind of rubber is that? Thanks Started by McDev |
1 |
Nov 20, 2015 Reply by Carlos Sa |
Scratch Built Ribs - Forming leading edge of ribI am sure there are a lot more 601, 701 and 750's out there that have experience this than Cruzer builders since the numbers are still l… Started by Bryan Walstrom |
16 |
Nov 19, 2015 Reply by McDev |
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2024 Created by Zenith.Aero. Powered by
Exlusive online community for active builders and pilots of Zenith Aircraft kits (Chris Heintz / Zenair light airplane designs).