Online Community of Zenith Builders and Flyers
Sort by:
Discussions | Replies | Latest Activity |
---|---|---|
Corvair Engine BuildersValve Lifters Builders- What lifters are you installing? Shallow dimple or Deep dimple? Sealed Power , Elgin , or Melling? I understand th… Started by Frederick Schutt |
1 |
May 16, 2015 Reply by Dave Gardea |
VDO Gauges LED LightsSee attached picture ( hope that worked). Shown on the Left side is an LED replacement LED that fit the VDO Gauges the current supplied to… Started by rob steenweg |
0 | May 15, 2015 |
Fly-In? Free Kayak Fishing Workshop in ArizonaThis is about five miles from the Show Low airport--for those who may be interested . . . http://azgfd.net/artman/publish/NewsMedia/Learn-… Started by Wayne Tyson |
0 | May 13, 2015 |
Keeping bare aluminum clean without polishing?Finalizing everything on the plane for the final trip to the airport in a week or two. I'm keeping it bare aluminum for now and only paint… Started by Mark Maltais |
18 |
May 13, 2015 Reply by Mack P. Kreizenbeck |
MA3-SPA dimensionAnyone have the top flange dimensions for a Marvel Schebler MA3-SPA carb? Started by William Stewart |
2 |
May 13, 2015 Reply by William Stewart |
Gross Weight CertificationAll,My question is a bit unusual given that our airplanes were well-designed to fit inside the light sport category (1320# Gross Weight, 13… Started by Patrick Ealy |
3 |
May 12, 2015 Reply by Roy Hood |
In search of a 12volt strobe power supplylooking for a 12 volt power supply for a whelen strobe light, mine went bad let me know ...thx joe Started by joseph aloof |
2 |
May 11, 2015 Reply by Ronald Steele |
801 fuselage wantedI am looking for a 801 fuselage kit in any stage of completion. email. tmbeierman@gmail.com Started by tim beierman |
0 | May 6, 2015 |
Aluminum fuel line fittingsI'm hung up on installing 3/8" 5052-0 aluminum fuel line in my right wing. This is stopping my progression to closing the right wing. What… Started by David Banahan |
5 |
May 4, 2015 Reply by Tim Juhl |
Wing storageI would like to hang my partially finished wing from my garage wall or ceiling so I may proceed to the next wing and then fuselage. I would… Started by David Banahan |
2 |
May 4, 2015 Reply by Tim Juhl |
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2024 Created by Zenith.Aero. Powered by
Exlusive online community for active builders and pilots of Zenith Aircraft kits (Chris Heintz / Zenair light airplane designs).