Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
Open Discussion Forums (non model specific) (2,955)
| Discussions | Replies | Latest Activity |
|---|---|---|
Installing the upgrade.......some tips, tricks and snafu'sOk, so I got the "upgrade" kit Monday. Already had started to drill things apart and had it ready so I could inventory and start locating a… Started by Timothy R Mix |
4 |
Feb 4, 2010 Reply by Timothy R Mix |
Upgrade Snag in the LAA counter balanceI have just finished installing the counter balance upgrade and the LAA measurements will not work as printed. If you lay out the new ribs… Started by Jeff Garrett |
6 |
Feb 2, 2010 Reply by Allan / Zenair Australia |
poste composite landing gear for 701I was wondering if anyone has experiece using or installing composite landing gear available from aircraft spruce? Started by john cober |
2 |
Jan 31, 2010 Reply by Andrzej Kostkiewicz |
Temporary fasteners?I noticed in zeniths blogs that they used some sort of cleco to hold the spar caps togather. It looked like a giant cleco with a wing nut o… Started by Greg Browning |
6 |
Jan 27, 2010 Reply by Greg Browning |
Push Pull tube almost doneStarted by Jeff Garrett |
1 |
Jan 24, 2010 Reply by Steve Weston |
ROTAX 912 UL or ULSPriced a new Rotex 912 and firewall forward kit. There is about 4500 dollars difference between the 80hp 912 and firewall forward and the 9… Started by Rodney Rix |
4 |
Jan 19, 2010 Reply by Debra and Patrick Nesbitt |
BRS ParachuteHas anyone installed a BRS parachute on their 750 or 701? If so where is it mounted, and what type is it, canister or softpack? Thanks for… Started by Kevin and Jackie Kellett |
6 |
Jan 18, 2010 Reply by Chumphol Sirinavin |
CH701 Inspection platesJUST AN FYI WHILE DOING THE FINAL ASSEMBLY AFTER PAINT WE HAD A FEW PROBLEMS WITH ELECTICAL AND FUEL LINE CONNECTIONS REQUIRING REMOVAL OF… Started by Mike Ethridge |
2 |
Jan 17, 2010 Reply by Taylor Ogden |
C H 701 windscreenPlans call for drilling #40 holes into tubing frame for the installation of the windscreen trim pieces. The oval head screws provided(#8?)… Started by Bill W. Proctor |
1 |
Jan 15, 2010 Reply by Chumphol Sirinavin |
NICOPRESS CABLE SLEEVEWhat is everyone using to press the sleeves on the rudder and elevator cables. The hand tools I have seen are quite expensive to only be us… Started by Rodney Rix |
6 |
Jan 14, 2010 Reply by Rodney Rix |
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2025 Created by Zenith.Aero.
Powered by
