Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
Open Discussion Forums (non model specific) (2,840)
| Discussions | Replies | Latest Activity |
|---|---|---|
Custom Battery CablesIn addition to custom fuel hoses, we now offer custom battery cables for experimental aircraft. We realized while building our aircraft th… Started by Steven Tschurwald |
0 | Oct 15, 2012 |
Forum To Discuss Items I have Available For Zenith BuildersHi to all. Many of you have purchased access panels and other products that I have for the Zenith series of airplane. I have started a fo… Started by George Race |
0 | Oct 9, 2012 |
canopy pivot point ? 601xlInstalling the canopy frame rails and unable to find the measurement from the firewall web to the canopy pivot point on the top logerons in… Started by daniel schaffer |
1 |
Oct 6, 2012 Reply by Jacky Winters |
Using a Corvair EngineI have a question for those of you using, or planning to use the Corvair Engine. After the recent failure of Mark Langford's engine, are… Started by Rodney Wren |
13 |
Oct 5, 2012 Reply by charles e rehberger |
Building an improved Flap Actuator HandleI want to upgrade the flap handle on my 701. I'm not really looking for a bunch more flap because I believe this plane does fine without it… Started by Vance Simons |
3 |
Oct 3, 2012 Reply by Lawrence F Bird |
Locking Fuel Caps for Zenith AircraftThere is a possibility of working on a locking fuel cap option for all the different Zenith models. What would be the interest in locking… Started by Steven Tschurwald |
4 |
Oct 2, 2012 Reply by Danal Estes |
Newbie questionMay be a stupid question, but are finger prints on the bare aluminum corrosion? I had to let things sit for a while and was a bit surprised… Started by Chris Craver |
2 |
Oct 1, 2012 Reply by John Austin |
Diaper your cowl!Somewhere in the process of fitting my 750's cowl, I let the spinner/cowl gap get pretty narrow: about 3/16" or so. (Yes, I used the "donut… Started by John Austin |
1 |
Sep 28, 2012 Reply by Jimmy Young |
Source of 2" square steel beamsAll, Does anyone have a source (store / part #) of the 2" square steel beams (painted red) used in the rudder workshop and seen in factory… Started by Joel Studtmann |
6 |
Sep 28, 2012 Reply by Mark Maltais |
Weight and balanceGroup, I'm ready to do a weight and balance. I already have oil in the engine, do I need to drain it to do the process? Ed Started by Dr. Edward L. Olds III |
10 |
Sep 23, 2012 Reply by Dr. Edward L. Olds III |
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2024 Created by Zenith.Aero.
Powered by
