Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
Discussions (5,813)
| Discussions | Replies | Latest Activity |
|---|---|---|
Oil pressure reading with engine shut downProbably a dumb question but this is the first time I’ve noticed that my oil pressure on the Dynon 120 shows 33 lbs with the engine off and… Started by Joe Donohue in Jabiru Engine Forum |
6 |
Jun 1, 2022 Reply by John Austin |
Ivoprop on 912 - no engine damage after full-power crashJust a brief note here on one odd little advantage of having an Ivoprop, an inexpensive but also less efficient prop that some fancier one… Started by Peter Chapman in Rotax Engine Forum |
1 |
May 31, 2022 Reply by Daniel Biton |
Wanted 1650 Lotus FloatsHI Anyone know where there might be a pair of 1650 Lotus Floats for my 750 STOL Project. Thanks Stan Started by Stanley Douglas Sheldrake in Classified / For Sale Postings |
9 |
May 30, 2022 Reply by David J. Beaulieu |
CH701 Zenith floats old style (flat gear spring)Hello All ! I am looking for install manual for Zenith 1150 floats that goes with the flat old style landing gear spring. Or even some p… Started by Dave in Open Discussion Forums (non model specific) |
0 | May 30, 2022 |
Box of Goodies for your Homebuilt. All SoldI have a box of goodies for your project. These came out of my 750 cruiser. I will not separate the parts.. You get to do that when you get… Started by Matt Miller in Classified / For Sale Postings |
2 |
May 27, 2022 Reply by Matt Miller |
Wanted amphibious for 701Please let me know if there is anything out there. Thank you Started by James Parent in Classified / For Sale Postings |
1 |
May 27, 2022 Reply by James Parent |
Homebuilt Help Videos for 750 Cruzer. SOLDThese videos answer all your questions. I could not have built without them. I have the fuselage , wing, and finishing set for the Cruzer.… Started by Matt Miller in Classified / For Sale Postings |
1 |
May 26, 2022 Reply by R Michael Moore |
Yamaha YG4 Engine Conversion?I have been doing some looking into doing a conversion on a yamaha YG4 apex FI snowmobile engine. I have found a lot of older discussion on… Started by Brendon de M. in Yamaha Engines |
9 |
May 26, 2022 Reply by James Neirinck |
MufflerFYI, UL mufflers (at least for the 350iS) now come from the factory with a reinforcing gusset to the exhaust pipe flange. I repaired my o… Started by David J. Beaulieu in UL Power Forum |
38 |
May 24, 2022 Reply by Scott Miller |
3300 low power ?HiHo, I suspect that my Jabiru 3300 motor is underpowered because it does not get up to the required RPM when stationary on the ground. I… Started by Steffen Glatz in Jabiru Engine Forum |
39 |
May 23, 2022 Reply by Dan Dempsey |
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2026 Created by Zenith.Aero.
Powered by
