Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
Discussions (5,812)
| Discussions | Replies | Latest Activity |
|---|---|---|
CH-640 info.I'm looking for the drawings for the aft baggage compartment for the CH-640. My plans set seems to be missing them. Also looking for sheets… Started by Q-640 in Open Discussion Forums (non model specific) |
3 |
Aug 31, 2025 Reply by Q-640 |
Z 750 Cruzer project in North Carolina SOLDZenith 750 Cruzer project s/n C75-10769 Located at AKH in EAA Chapter 309 hangar Status: Fuselage structure is built and, the engine is hu… Started by John Wyatt in Open Discussion Forums (non model specific) |
7 |
Aug 29, 2025 Reply by David Luther |
Thanksgiving/Moving SaleCleaning out the hanger to get ready for a move to Washington. I bought a 750 STOL project and decided to go a different way with the engin… Started by James Machin in Classified / For Sale Postings |
6 |
Aug 24, 2025 Reply by James Machin |
Spinners for saleAcquired these over the years while constructing my CH300 with an 0320 Lycoming spinning a McCauley prop. The Orange one is for 3 blades, 1… Started by Peter L. Barbour in Classified / For Sale Postings |
0 | Aug 22, 2025 |
F/S Sensenich Ground-Adjustable PropSensenich GA Prop for sale. Lightweight . Easy pitch adjustment. Excellent condition. Perfect for a Zenith, RV, or STOL build. $3000 Free… Started by Anderson in Classified / For Sale Postings |
0 | Aug 21, 2025 |
trim tab angleI Just finished the elevator trim tab and found that the angle in the up position meets the specs 20 ° +- 2 but in the down position it st… Started by Juan Gonzalez in Open Discussion Forums (non model specific) |
3 |
Aug 21, 2025 Reply by Michael Collins |
RPM pickup for MGL EMSHas anyone used an inductive pickup from the ignition system on a WW Corvair to drive the rpm function on an MGL engine monitor? Or other r… Started by Bruce Atherton in Corvair Engine Forum |
3 |
Aug 20, 2025 Reply by John Guscott |
compression level of puck system on CH-601 w/ Continental O-235How far should the rudder pedal attachment bar rise up off of the lower bearing block when the airplane is resting on the gear? I'm try… Started by Jacky Winters in Open Discussion Forums (non model specific) |
5 |
Aug 20, 2025 Reply by Gary Welch |
Cruzer POH with Aeromomentum engine?I am looking for a draft POH for my CH750 Cruzer with an Aeromomentum engine. Does anyone have one I could use as a starting point to make… Started by Ed Hensel in AeroMomentum Engine Forum |
1 |
Aug 14, 2025 Reply by Bob Simmons |
Proposed battery changeHi, I was thinking recently of replacing the lead/acid battery with a LIFePO battery as a means of saving weight, my engine is a co… Started by Thomas carlin in Continental Engines |
4 |
Aug 13, 2025 Reply by Thomas carlin |
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2026 Created by Zenith.Aero.
Powered by
