Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
Discussions (5,814)
| Discussions | Replies | Latest Activity |
|---|---|---|
Pneumatic Riviter custome headdsHi All I have a pneumatic riveter, is it possible to get the customised heads and retro fit them? Cheers Started by Greg O'Shannessy in Open Discussion Forums (non model specific) |
13 |
Feb 3, 2020 Reply by Dan Hill |
750SD RudderHas anyone had issues with the trailing edge of the 750 SD rudder developing a duck tail? See picture. IF so how did you correct? if not,… Started by Steve Lemley in Open Discussion Forums (non model specific) |
13 |
Feb 2, 2020 Reply by Scott Smith |
Artex ELT 345 Software BugI recently had my Cruzer parked at a quiet airstrip and noticed a VERY low volume continuous tone in the plane which I traced to the buzzer… Started by Steven M Bray in Open Discussion Forums (non model specific) |
0 | Feb 1, 2020 |
Looking for 750/801 SD Stol Lycoming or ULS 135 to 150hpHello everyone, i am interested in purchase a CH750/801 SD stol 135 to 150hp Lycoming or ULS engine, preferably glass panel. Please send me… Started by Angel Galicia in Classified / For Sale Postings |
1 |
Jan 31, 2020 Reply by Angel Galicia |
Corrosion ProtectionI have a question about corrosion Protection between parts prior to riveting. Would using John Deere’s Buff Primer/Inhibitor part number T… Started by Robert Boyd in Open Discussion Forums (non model specific) |
4 |
Jan 31, 2020 Reply by Robert Boyd |
Need CFI for check ride in 601XLBI am a student pilot and I have a 601XLB that i would like to get some training in. My CFI has not had any flight time in this type of Airc… Started by Russell Clark in Open Discussion Forums (non model specific) |
3 |
Jan 31, 2020 Reply by Buzz Air Flight Academy |
130 alternator beltDoes anyone have the part# for the belt on the 130? Thanks Glenn Davis Started by Glenn Davis in Viking Forum |
2 |
Jan 29, 2020 Reply by Jan Eggenfellner |
avex rivet testingWe had a discussion a while back about the strength of Avex rivets and if rivets from other suppliers were as strong as the rivets supplied… Started by Dan Hill in Open Discussion Forums (non model specific) |
7 |
Jan 28, 2020 Reply by Brian Thomas |
Corvair Changes???? WHYDid some more checking on plugs. In the WW 2014 Corvair conversion manual ( i don't have the new MOP) It lists the DENSO IWF16. ( which… Started by David J Tillema in Open Discussion Forums (non model specific) |
4 |
Jan 28, 2020 Reply by David J Tillema |
Corvair CollegesHello All I was looking around WW web site and cannot find a schedule for any upcoming Corvair colleges does anybody know and where some… Started by John Mazzolini in Corvair Engine Forum |
7 |
Jan 27, 2020 Reply by George Burns |
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2026 Created by Zenith.Aero.
Powered by
