Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
Discussions (5,814)
| Discussions | Replies | Latest Activity |
|---|---|---|
Prewired R/R connector from ULTo repair my "crispy" wires from the PMA to the R/R connector I ordered a prewired connector from the UL distributor (Wicks Aircraft). Kei… Started by David J. Beaulieu in UL Power Forum |
18 |
Nov 5, 2019 Reply by John Bell |
Things to try before removing a cylinder with low compression?Hello all,I have one cylinder with compression in the low 60's on a 3300A with 300 hours. When checking compression I can hear air escaping… Started by Mike Chekal in Jabiru Engine Forum |
2 |
Nov 5, 2019 Reply by geo. keyes, jr. |
Jabiru and CAMit Engines Discussion GroupI've been a long-time member of the Jabiru/Camit Engines group on Yahoo. It has been a gold mine of useful tips and advice about maintaini… Started by John Austin in Jabiru Engine Forum |
1 |
Nov 5, 2019 Reply by Bob Simmons |
Erroneous Fuel Flow IndicationMy STOL 750 has an Electronics International FT-60 "Red Cube" fuel flow sensor. The signal wire goes to my MGL RDAC XF interface board, th… Started by John Austin in Open Discussion Forums (non model specific) |
16 |
Nov 4, 2019 Reply by Lance W Miller |
Lithium Batteries, Again I Am SureI sure would like to save 20# but the EarthX system is pricey. Is there any good information out there on running a $100 Powersports-type… Started by Charles N. Sturdivant in Open Discussion Forums (non model specific) |
9 |
Nov 4, 2019 Reply by Loren Warner |
COMMS RADIOGood Morning I am beginning my search for my 701 instrument panel. For those of you that have installed the Dynon radio, how do you like t… Started by James Ballenger in Open Discussion Forums (non model specific) |
2 |
Nov 3, 2019 Reply by James Ballenger |
Flap motor gearsHello fellow airplane builders, does anyone know how many degrees the flaperon moves for each 360 degree twist of the flap gear shaft? If… Started by William D. Phillips in Open Discussion Forums (non model specific) |
4 |
Nov 1, 2019 Reply by John Austin |
Exhaust pipe supportTapping into the "brain trust" on this forum - anyone doing it, if so how? Trying to get some ideas on how to support the exhaust tube an… Started by David J. Beaulieu in UL Power Forum |
2 |
Nov 1, 2019 Reply by David J. Beaulieu |
Insurance renewalgot my renewal on my policy, went up over $100 to $950 So I figured let me try someone else just to compare, even though I’ve been using th… Started by David Krakowsky in Open Discussion Forums (non model specific) |
8 |
Oct 30, 2019 Reply by Bob Pustell |
Packing the truck at the factoryThis is a before and after picture of a Cruzer kit in the back of the truck after 1200 miles and I-70 through Indianapolis!!! I can't see a… Started by Jeff Butler in Open Discussion Forums (non model specific) |
2 |
Oct 30, 2019 Reply by Bob Pustell |
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2026 Created by Zenith.Aero.
Powered by
